Potter DIY: “Harry Potter” Keychains
Looking for an easy gift or a simple way to Potter up your life? Follow the steps below to make a set of resin-based keychains in the Hogwarts House colors.
What You’ll Need:
- Equal parts A and B resin
- Gloves
- Plastic cups
- A measuring cup
- Mica powder (or dyes)
- Glitter
- A heat gun (or a lighter)
- Harry Potter molds (here are some similar ones; the crests are from Glitter Flow on Instagram)
- Mixing sticks
Directions:
Step 1: Pour equal parts of resins A and B into a cup (about 2 oz), and stir for four minutes until both parts are mixed well.
Step 2: Divide the mixture into four smaller cups and add your dye of choice (red, yellow, green, blue), then mix each well.
Step 3: In the mold, add corresponding colored glitter to the bottom, and then add the color resin to each mold.
Step 4: Apply a heat gun or a lighter to the outside of the mold to keep any bubbles from forming, and wait for 24 hours (or until the resin is completely set) before unmolding.
This DIY was submitted by a MuggleNet reader. Have something you’d like to submit? Check out our guidelines here.
